2005-2008 Tacoma PreRunner and
made in the USA 1/4" steel construction, laser cut and welded to
3" kit contains two strut mounts (including nuts and studs), full
color instructions and complete alignment specs as well as lifting
blocks and u-bolts for the rear-- all packed into a 7"x7" box
weighing 9 pounds.
Allows fitting of up to 33" tires (285/70 x
17) on stock offset wheels, 32" on aftermarket wheels with similar
to stock offset (test fit tire and wheel package as every company
uses a different measuring tape).
Increases ground clearance over traditional
bracket type lift kits even without the use of larger wheels and
tires for those interested in getting the most out of their truck
for recreational or construction use.
Quality - The Truxxx kit does not change preload and maintains the
stock smooth ride. Other kits get their lift from increasing preload
on the spring. This means that the ride is harsher and less
compliant. This is a big issue for many consumers.
Installation of the Truxxx kit requires no
disassembly of the strut.Other kits require the disassembly of the
strut in order to install their kit. This means that a strut
compressor is required (special tools) which not every shop has.
Also, if the strut is reassembled slightly crooked (no positive
indexing on the strut!) then the assembly will have to be
disassembled and straightened. This happens fairly often. Because of
the strut disassembly/reassembly the installation time is about
DOUBLE that of the Truxxx kit.
Truxxx Lift/Level kit does not require any
after installation maintenance (no need to re-torque the mounting
bolts ) Other kits must be re-torqued after 6-12,000 miles because
of its polyurethane construction (plastic flexes under